Indesit I2 D71W UK Energy Label

To clean the lint filter, open the dryer door and locate the filter at the bottom. Pull it out, remove the lint by hand, wash it under running water if necessary, and ensure it is completely dry before reinserting it.
First, check if the dryer is plugged in and the power socket is functioning. Ensure the door is fully closed and the start button is properly pressed. If the problem persists, it may require professional servicing.
If the dryer is not heating, it could be due to a tripped thermostat or a blown thermal fuse. Check these components and replace them if necessary. If unsure, consult a professional technician.
The condenser unit should be cleaned at least once a month to ensure optimal performance. Remove it and rinse under running water, then allow it to dry completely before reinserting it.
Always clean the lint filter after each use, do not overload the dryer, and avoid drying items with flammable stains. Ensure proper ventilation and do not cover the dryer's air vents.
To reduce drying time, make sure the lint filter is clean, the load is not too large, and clothes are well-spun before drying. Select appropriate drying settings for the fabric type.
To reset the dryer, unplug it from the power source, wait for about 5 minutes, then plug it back in. This may clear minor electronic glitches.
Check if the belt is broken or slipped off, as this can prevent the drum from spinning. If the belt is intact, the issue might be with the motor or idler pulley, which may require a technician's assistance.
Remove clothes promptly after the cycle ends, and shake them out before folding or hanging. Using the 'anti-crease' feature can also help reduce wrinkles.
It is not recommended to dry shoes in the dryer as it can damage both the shoes and the dryer. Instead, air-dry shoes or use a dedicated shoe drying rack if available.