Indesit Ecotime IWDC 65125 S UK N Energy Label
![Indesit Ecotime IWDC 65125 S UK N Washer Dryer manual cover](/images/jjyLPhZocmKxFmostHzkocJL/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add detergent to the dispenser. Turn the program selector knob to the desired wash program. Adjust any additional settings if needed and press the start/pause button to begin the cycle.
Ensure that the appliance is plugged in and switched on at the mains. Check if the door is closed properly. Make sure the water supply is turned on. If the problem persists, check the display for error codes or consult the user manual for further troubleshooting.
First, unplug the appliance. Locate the filter access panel, usually at the bottom front of the machine. Open the panel and unscrew the filter cap. Remove any debris or lint and rinse the filter under running water. Replace the filter and secure the cap before closing the panel.
Check if the drain hose is kinked or blocked. Ensure that the filter is clean and free of debris. Make sure the drainage system is not clogged. If the problem continues, there might be an issue with the pump, and professional service may be required.
After completing a wash cycle, remove some items if necessary to avoid overloading. Turn the program selector knob to a drying program. Adjust the drying time or dryness level as needed, then press the start/pause button to initiate the drying cycle.
Regularly clean the detergent drawer and filter. Check for and remove any lint or debris from the door seal. Ensure the drum is clean and dry after use. Inspect hoses for signs of wear or leaks and replace them if necessary.
Yes, you can select a combined wash and dry program. Load the laundry, add detergent, select the wash/dry program, adjust any settings as needed, and press the start/pause button to run the complete cycle.
Ensure the appliance is level and stable. Check for any loose items like coins or buttons in the drum. Make sure the load is balanced. If the noise persists, there may be a mechanical issue, and professional service may be required.
Run a maintenance wash using a drum cleaner or white vinegar at the highest temperature setting. Ensure the door is left open after use to allow the drum to dry. Clean the detergent drawer and door seal regularly to prevent mold growth.
Refer to the user manual for a list of error codes specific to your model. Common codes may indicate issues such as water supply problems, door lock faults, or drainage issues. Each code will guide you on troubleshooting steps or when to seek professional help.