Indesit DSIE 2B10 UK N Energy Label
![Indesit DSIE 2B10 UK N Dishwasher manual cover](/images/oYFxOOsnrIJskhuoTZsJdkgp/thumbs/thumb175x175.webp)
To start a wash cycle, load the dishwasher, add detergent, select the desired program using the program selector button, and then press the start button. The dishwasher will begin the cycle.
Check if the drain hose is kinked or blocked. Also, inspect the filter for clogs and clean it if necessary. Ensure the sink's drain is not blocked and that the dishwasher's drain pump is functioning.
It is recommended to clean the filter every month to ensure optimal performance and prevent blockages.
Use only dishwasher-specific detergents. Avoid using regular dish soap as it can cause excessive suds and damage the dishwasher.
Ensure that you are using the correct amount of detergent and that the rinse aid compartment is filled. Also, check the water softener settings if your area has hard water.
Check for any items that may have fallen into the bottom of the dishwasher. Ensure that dishes are loaded correctly and not touching each other. Additionally, check the spray arms for obstructions.
Regularly clean the filter, check and clean the spray arms, inspect the door seal for debris, and run an empty cycle with a dishwasher cleaner monthly.
To reset the dishwasher, turn it off by pressing the power button, wait a few minutes, and then turn it back on. If needed, consult the manual for specific reset instructions.
Inspect the door latch for damage and ensure nothing is obstructing the door closure. Also, check if the dishwasher is level and adjust the feet if necessary.
Ensure the rinse aid dispenser is full, select a program with a higher drying temperature, and open the door slightly after the cycle completes to allow steam to escape.