Indesit DSFE 1B19 C Energy Label
![Indesit DSFE 1B19 C Dishwasher manual cover](/images/riNHEnBqvSCtBVRHptkqbfbZ/thumbs/thumb175x175.webp)
To reset the Indesit DSFE 1B19 C dishwasher, press and hold the start/reset button for about 3 seconds until the control panel lights flash. Release the button and wait for the dishwasher to reset.
Check if the dishwasher is properly plugged in and the circuit breaker is not tripped. Ensure the door is fully closed and latched. Also, verify that the water supply is turned on.
Remove the lower rack to access the filter. Turn the filter counterclockwise to remove it. Rinse under running water to remove debris and reinstall by turning it clockwise until secure.
Ensure the drain hose is not kinked or blocked. Check the filter for clogs and clean if necessary. Verify that the garbage disposal (if connected) is clear of obstructions.
Use a high-quality dishwasher detergent, either in tablet, powder, or gel form. Follow the manufacturer's instructions for the best results.
Regularly clean the filter and interior. Run an empty cycle with a dishwasher cleaner or a cup of white vinegar to remove odors. Keep the door slightly open when not in use to allow air circulation.
Regularly clean the filter, spray arms, and door seals. Check and clean the detergent dispenser and inspect hoses for leaks or wear. Run an empty hot cycle with a dishwasher cleaner monthly.
Place large items at the sides and back of the rack so they do not block the spray arms. Ensure all items are dishwasher safe and do not obstruct the detergent dispenser. Load utensils with handles down for better cleaning.
Check door seals for damage and ensure they are clean. Verify the dishwasher is level and not overloaded. Inspect hoses and connections for leaks and tighten or replace if necessary.
Yes, but ensure that the plastic items are labeled as dishwasher safe. Place them on the top rack to avoid exposure to the heating element.