Hyundai Tucson 2020 Getting Started Guide
![Hyundai Tucson 2020 SUV manual cover](/images/HrhUBvrAJuUpjhIDlhGuiejt/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, ensure that all tires are inflated to the recommended pressure. Then, drive the vehicle at speeds above 20 mph for at least 10 minutes to allow the system to recalibrate.
Hyundai recommends using SAE 5W-30 or 5W-40 fully synthetic engine oil for the Tucson 2020. Always check the owner's manual for the most accurate specifications.
To connect your smartphone via Bluetooth, ensure the Bluetooth feature is activated on your phone. On the Tucson's infotainment screen, select 'Setup', then 'Bluetooth', and follow the prompts to pair your device.
Hyundai suggests servicing the Tucson every 7,500 miles or 12 months, whichever comes first. This includes oil changes, tire rotations, and inspections of the brakes, battery, and other systems.
To replace the key fob battery, use a small flat-head screwdriver to gently pry open the fob case. Replace the old battery with a new CR2032 battery, making sure the positive side faces up.
If the check engine light illuminates, check for any obvious issues such as a loose gas cap. If the light remains on, have the vehicle inspected by a qualified technician to diagnose and address any underlying issues.
To update the navigation system, visit the Hyundai navigation update website to download the latest software onto a USB drive. Insert the drive into your vehicle's USB port and follow the on-screen instructions to complete the update.
The towing capacity for the Hyundai Tucson 2020 is up to 2,000 pounds when properly equipped with the towing package. Ensure that you adhere to all weight limits and guidelines as specified in the owner's manual.
The Hyundai Tucson 2020 features an automatic AWD system that activates when necessary. For manual engagement, press the AWD lock button located on the center console to distribute power equally between the front and rear wheels.
To jump-start your Tucson, connect the positive cable to the positive terminal of the dead battery and then to the positive terminal of the donor battery. Connect the negative cable to the negative terminal of the donor battery and the other end to a metal ground on the Tucson. Start the donor vehicle, then the Tucson. Once started, remove the cables in reverse order.