Hyundai Sonata Hybrid 2018 Getting Started Guide
![Hyundai Sonata Hybrid 2018 Sedan manual cover](/images/skFbOdCzfPWVcSkjLojvRjDv/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, first ensure all tires are inflated to the recommended pressure. Then, drive the vehicle above 20 mph for a few minutes. The system should automatically recalibrate and reset.
The recommended oil type for the Hyundai Sonata Hybrid 2018 is 0W-20 synthetic oil. It is important to use the correct oil to ensure optimal engine performance and efficiency.
The brakes should be inspected at least once a year or every 15,000 miles, whichever comes first. However, brake pads and rotors may need earlier servicing depending on driving habits and conditions.
If the hybrid system warning light illuminates, pull over safely and turn off the engine. Restart the car to see if the warning resets. If it persists, consult your Hyundai dealer as soon as possible to diagnose potential issues.
Yes, the Hyundai Sonata Hybrid 2018 is designed to run on regular unleaded gasoline with an octane rating of 87 or higher. Using higher octane fuel will not necessarily improve performance.
To enable Eco mode, press the Drive Mode button located on the center console until the Eco mode indicator appears on the dashboard. This mode optimizes fuel efficiency by adjusting throttle response and transmission shift patterns.
The Hyundai Sonata Hybrid 2018 is not rated for towing. It is recommended to avoid towing with this vehicle to prevent potential damage to the hybrid system and drivetrain.
To replace the key fob battery, use a small screwdriver to open the fob's case. Remove the old battery and insert a new CR2032 battery, ensuring the positive side faces up. Reassemble the fob by snapping the halves back together.
Common causes for a check engine light include a loose fuel cap, faulty oxygen sensor, or issues with the catalytic converter. It's advisable to use an OBD-II scanner to read the error code and determine the specific issue.
To connect your smartphone via Bluetooth, ensure your phone's Bluetooth is enabled. In the vehicle, press the 'Setup' button on the infotainment system, then select 'Bluetooth' > 'Add New Device' and follow the prompts to pair your phone.