Hyundai Genesis 3.8 2016 Owner's Manual
![Hyundai Genesis 3.8 2016 Coupe manual cover](/images/UEIjBECDGtXaVlgnCKmLbRJK/thumbs/thumb175x175.webp)
For optimal performance, it is recommended to change the oil every 5,000 to 7,500 miles, depending on your driving conditions and habits.
The Hyundai Genesis 3.8 2016 Coupe requires SP-IV or equivalent transmission fluid for its automatic transmission.
To reset the TPMS, drive the vehicle at a speed above 20 mph for at least 10 minutes. This should reset the sensors. If not, consult the owner's manual or a professional.
The recommended tire pressure for the 2016 Hyundai Genesis Coupe is typically 35 psi for both front and rear tires. Always check the sticker on the driver's side door jamb or the owner's manual for confirmation.
To replace the cabin air filter, open the glove box, remove the damper, unhook the glove box, and access the filter cover. Replace the old filter with a new one, ensuring the airflow direction is correct.
If the check engine light comes on, check if the gas cap is properly tightened. If the light remains on or blinks, it’s advisable to have the vehicle diagnosed by a professional technician.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid aggressive driving, and reduce idling time.
To jump-start the vehicle, connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the booster battery. Connect the negative cable to the negative terminal of the booster battery and the other end to an unpainted metal surface on the dead vehicle. Start the booster vehicle and then the Genesis.
To pair your smartphone, enable Bluetooth on your phone, select 'Setup' on the vehicle's infotainment system, choose 'Bluetooth', then 'Add New'. Select your vehicle on your phone, confirm the passkey, and complete the pairing process.
To replace the headlight bulb, open the hood, disconnect the power connector from the back of the headlight assembly, remove the rubber cover, unclip the bulb retainer, and replace the bulb. Reassemble in reverse order.