Husqvarna MZ54 97045580200 Operator Manual
![Husqvarna MZ54 97045580200 Lawn Mower manual cover](/images/RgnBmtWYADsuXWQFljOhBPHK/thumbs/thumb175x175.webp)
To start the Husqvarna MZ54, ensure the parking brake is engaged, the blades are disengaged, and the throttle is set to choke. Turn the key to the start position and release it once the engine starts.
The Husqvarna MZ54 requires unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends greater than 10%.
Change the oil after the first 5 hours of use, and then every 50 hours or at the start of each mowing season, whichever comes first.
The recommended tire pressure for the Husqvarna MZ54 is 15 psi for the front tires and 10 psi for the rear tires.
Check the PTO switch and ensure it is in the engaged position. Inspect the belt for damage or dislodgment and make sure the safety interlocks are properly engaged.
Routinely check for debris buildup and clean the deck. Inspect the blades for sharpness and replace them if they are dull or damaged. Grease the spindles and check belt tension.
Ensure the blades are sharp, the deck is clean, and the tire pressure is correct. Cut grass when it is dry and mow at the recommended height.
Check the fuel level, battery charge, and ensure the choke is properly set. Inspect the spark plug for wear and ensure all safety interlocks are engaged.
To level the deck, park the mower on a flat surface, measure the height of the blade tips on both sides, and adjust the deck hangers until the measurements are equal.
Clean the mower thoroughly, drain the fuel or add a stabilizer, change the oil, remove the battery, and store it in a dry, sheltered area. Cover the mower to protect it from dust and moisture.