Husqvarna MZ54 96795370300 Operator Manual

Ensure the parking brake is engaged, the blades are disengaged, and the throttle is set to the choke position. Turn the ignition key to the start position until the engine starts, then release the key.
Check the tire pressure to ensure they are equal, inspect the blades for damage or wear, and adjust the deck level to the manufacturer's specifications.
Change the oil after the first 5 hours of use, then every 50 hours of operation or at the start of each mowing season.
Ensure the mower is off and cool, then use a garden hose to rinse off grass clippings. For stubborn debris, use a plastic scraper, and avoid using metal tools that could damage the deck.
Check for fuel in the tank, ensure the battery is charged, inspect the spark plug, and confirm that the PTO switch is off and the brake is engaged.
Change the oil and oil filter, replace the air filter, check and replace the spark plug if necessary, inspect the blades for wear, and check the tire pressure.
Use the cutting height lever located on the operator's left side to adjust the deck to the desired height setting.
Check for debris lodged in the blades or deck, inspect the blades for balance, and ensure that all bolts and nuts are tightened securely.
Ensure the blades are sharp, mow at a slower speed, and raise the cutting deck to prevent clumping and ensure better discharge of clippings.
Clean the mower thoroughly, remove the battery and store it in a cool, dry place, add fuel stabilizer to the tank, and cover the mower to protect it from dust and moisture.