HPI Racing ELC-6S 113373 Manual Upadate

HPI Racing ELC-6S 113373 Speed Control manual cover

Pages 2

Year 0

Language(s)

of 2

HPI Racing ELC-6S 113373 Speed Control Specification

The HPI Racing ELC-6S 113373 Speed Control is a high-performance electronic speed controller engineered for remote-controlled vehicles. Designed to handle the demands of modern RC enthusiasts, it supports up to 6S LiPo batteries, delivering a robust and efficient power management solution. The speed control unit is equipped with a high-precision throttle response system, enabling smooth acceleration and precise control crucial for competitive racing scenarios. It features a durable construction with a heat-resistant case and a built-in cooling fan to ensure optimal performance and longevity even under strenuous conditions. The ELC-6S includes advanced programming options accessible through a user-friendly interface, allowing for customization of throttle profiles, brake settings, and more to match the user's driving style and vehicle requirements. Additionally, it supports sensorless motor operation, providing flexibility in motor selection. Safety features such as thermal protection, low-voltage cutoff, and fail-safe mechanisms are integrated to protect both the ESC and the connected components from potential damage. The compact design of the ELC-6S facilitates easy installation in a variety of chassis configurations, making it a versatile choice for different RC models. Its compatibility with a wide range of motors and batteries, alongside its programmable features, makes the HPI Racing ELC-6S 113373 Speed Control an ideal choice for hobbyists seeking a balance of power, reliability, and customization in their RC setups.

HPI Racing ELC-6S 113373 Speed Control F.A.Q.

How do I calibrate the HPI Racing ELC-6S 113373 Speed Control?

To calibrate the speed control, first ensure the transmitter is on and set to the correct model. Turn on the receiver and ESC, then follow the calibration procedure in the manual by pressing the set button until the LED begins to flash, indicating it's in calibration mode. Follow the prompts for full throttle, full brake, and neutral positions.

What should I do if the ELC-6S does not respond to throttle input?

Check the battery connections and ensure the battery is fully charged. Verify that the transmitter and receiver are properly bound and that the ESC is calibrated correctly. Additionally, inspect the throttle channel settings on your transmitter.

Can the ELC-6S handle 6S LiPo batteries?

Yes, the HPI Racing ELC-6S 113373 Speed Control is designed to handle up to 6S LiPo batteries, providing high power output for demanding applications.

How do I troubleshoot overheating issues with the ELC-6S?

Ensure that the ESC is not overloaded by checking the motor and gearing setup. Make sure there is sufficient airflow around the ESC for cooling. Additionally, check for any obstructions or debris that might be restricting airflow.

What maintenance does the ELC-6S require?

Routinely check for any loose connections or signs of wear. Ensure the cooling fan is operational and free of debris. Regularly inspect the wires and connectors for any damage or corrosion.

How do I set the ESC to forward/brake mode only?

Access the programming mode by pressing the set button while turning on the ESC. Use the manual to navigate to the running mode settings and select forward/brake mode by following the LED indicators.

Why is the LED on the ESC flashing red?

A flashing red LED typically indicates a low voltage cutoff. Check the battery voltage and ensure it is above the minimum threshold. Replace or recharge the battery if necessary.

Can I use the ELC-6S with a sensor-based motor?

The ELC-6S is designed for sensorless operation. While it can technically work with sensor-based motors, optimal performance is achieved with sensorless motors.

How can I extend the lifespan of my ELC-6S ESC?

Avoid running the ESC at its maximum ratings continuously. Ensure proper cooling and maintain a clean operating environment. Regularly inspect and maintain all connections and components.

What is the procedure for resetting the ELC-6S to factory settings?

To reset the ELC-6S to factory settings, enter programming mode and select the reset option by following the LED indicators as outlined in the user manual. This will restore all settings to default values.