Hotpoint RDGR 9662 GK UK N Quick Guide
![Hotpoint RDGR 9662 GK UK N Washer Dryer manual cover](/images/bHhMseJoAJAXpjhuUsISsupN/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired program using the control dial, adjust any additional settings, and press the start button.
Check if the drain hose is kinked or blocked. Ensure the filter is clean and free from debris. If the problem persists, inspect the pump for obstructions.
Remove the detergent drawer by pulling it out until it stops, then press the release button and take it out completely. Clean it with warm water and a soft brush before reinserting it.
Excessive vibration can be caused by an unbalanced load. Make sure the laundry is evenly distributed in the drum. Check if the appliance is level and adjust the feet if necessary.
Regularly clean the detergent drawer, check and clean the filter, ensure the door seal is free from debris, and run a maintenance wash with a washing machine cleaner.
Select the drying program by turning the control dial to the desired setting. Adjust the drying time and temperature if needed, then press the start button to begin.
Run a hot wash cycle with a washing machine cleaner or white vinegar to eliminate odors. Ensure the door is left open after each wash to allow the drum to dry.
Regularly clean the filter after each drying cycle and check the lint trap for any build-up. Avoid overloading the machine to ensure effective lint removal.
Refer to the user manual for specific error code meanings. Common solutions include checking water supply, ensuring the door is closed, and resetting the machine.
Use full load cycles whenever possible, select lower temperature settings, and regularly maintain the machine to ensure optimal performance.