Hotpoint RDG 9643 KS UK N Quick Guide
![Hotpoint RDG 9643 KS UK N Washer Dryer manual cover](/images/uBLSobpaeOcuwCVlyaWFLmzv/thumbs/thumb175x175.webp)
To avoid unbalanced loads, distribute clothes evenly around the drum. Load large and small items together to maintain balance, and avoid overloading by following the manufacturer's load recommendations.
First, check if the drain hose is kinked or blocked. Clean the pump filter and ensure it's free from debris. If the problem persists, inspect the drain pump for any obstructions or contact a service technician.
Remove the detergent drawer by pulling it out until it stops, then press the release button to fully remove it. Rinse the compartments under warm water and use a soft brush to remove any residue before reinserting it.
Regularly clean the drum with a washing machine cleaner, check and clean the filter, ensure the door seal is free from debris, and leave the door open after use to prevent mold growth.
Ensure the appliance is plugged in and the power socket is working. Check the door is properly closed and locked. Verify if the water supply is turned on and that the start button has been pressed.
Separate clothes by fabric type and use the appropriate drying cycle. Do not overload the dryer, as this can lead to longer drying times and increased energy usage.
To reset the washer dryer, turn off the appliance, unplug it, and wait for about one minute. Plug it back in and turn it on. If the error persists, consult the user manual for specific error codes or contact customer support.
Signs include unusual noises, persistent error codes, water leaks, and failure to start or complete cycles. If troubleshooting doesn't resolve these issues, it's time to call a professional.
Wash full loads when possible, use cold water settings, ensure regular maintenance, and utilize the eco-mode if available. Also, regularly clean the lint filter to maintain drying efficiency.
Ensure the appliance is level on the floor by adjusting the feet. Check that the load is balanced and that transit bolts have been removed if the appliance is newly installed.