Hotpoint RD 966 JKD UK N Quick Guide
![Hotpoint RD 966 JKD UK N Washer Dryer manual cover](/images/KnAvXbIjXOWiHDwBMOYXvqDW/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum, add detergent, and close the door. Turn the selector knob to choose the desired wash cycle, adjust the temperature and spin speed if necessary, and press the 'Start/Pause' button to begin the cycle.
Ensure that the appliance is plugged in and switched on. Check that the door is closed properly and that the 'Start/Pause' button has been pressed. If the problem persists, verify that there are no issues with the power supply or circuit breaker.
To clean the detergent drawer, pull it out until it stops, press the release button, and remove it completely. Rinse under warm water to remove any detergent residue. Reinsert the drawer once it is clean and dry.
Ensure that you have not overloaded the drum and that the selected drying program matches the fabric type. Clean the filter and make sure the water tank is empty. If issues persist, consider adjusting the drying time or temperature settings.
Run an empty cycle with a drum cleaning detergent or a mixture of vinegar and baking soda. Select a high-temperature setting to help remove any residue or odors. Regular drum cleaning is recommended for optimal performance.
Check all hoses and connections for any signs of damage or looseness. Inspect the door seal for any debris or wear that may prevent a tight seal. Ensure that the detergent drawer is not clogged and is inserted correctly.
The lint filter should be cleaned after every drying cycle. Remove the filter from the dryer, clear any lint, and rinse it under warm water. Allow it to dry before reinserting. Regular maintenance helps prevent blockages and ensures efficient drying.
Yes, you can wash and dry a duvet, but ensure it fits comfortably in the drum without overloading. Use a gentle cycle and select appropriate settings for bulky items. It might be necessary to dry in smaller, separate batches for even drying.
Use a commercial descaling agent or a mixture of vinegar and water. Run an empty high-temperature cycle to help remove any limescale buildup. Regular descaling is recommended every few months depending on water hardness.
Ensure the washer dryer is level and stable on the floor. Check for any loose items or coins in the drum that might be causing noise. Verify that the load is balanced and not too heavy. Adjust the feet of the machine if necessary.