Hotpoint NSWR 945C WK UK N Energy Guide

To start a wash cycle, load your laundry into the drum, add detergent, close the door, select the desired washing program using the dial, and press the "Start/Pause" button.
If your machine is not draining, check the drain hose for blockages, ensure the filter is clean, and verify that the pump is not obstructed. Also, make sure the drain hose is positioned correctly.
Remove the detergent drawer by pulling it out and pressing the release button. Clean it with warm water and a brush to remove any residue, then dry and replace it.
Regularly clean the detergent drawer and filter, run an empty hot wash cycle with a washing machine cleaner monthly, and ensure the door seal is dry and free from detergent buildup.
Ensure the washing machine is level on the floor, check that the transit bolts have been removed, redistribute the load evenly inside the drum, and avoid overloading.
Consult the user manual for the specific error code explanation. Common fixes include checking water supply, ensuring the door is closed properly, and resetting the machine by turning it off and on again.
Use cold water settings when possible, opt for shorter wash cycles, ensure full loads without overloading, and regularly maintain the machine to ensure efficiency.
Leave the door slightly open after each wash to allow the interior to dry, clean the door seal regularly, and use a washing machine cleaner periodically.
Yes, use the Delicates program with a suitable detergent and place delicate items in a mesh laundry bag to protect them during the wash cycle.
Distribute clothes evenly around the drum, avoid packing them tightly, and ensure there's adequate space for water and detergent to circulate effectively.