Hotpoint NSWR 743U GK UK N Quick Guide
![Hotpoint NSWR 743U GK UK N Washing Machine manual cover](/images/vhwYeRhkeGGbLYVLRvVdKMqz/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, close the door, select your desired program using the dial, and press the start button.
Ensure the machine is plugged in and switched on. Check if the door is closed properly. Make sure the water supply is turned on and the start button has been pressed.
Remove the detergent drawer by pulling it out, then press the release lever. Clean it with warm water and a soft brush to remove any detergent residue. Allow it to dry before reinserting.
Run an empty hot wash cycle with a drum cleaner or white vinegar to remove any build-up or odors from the drum.
Ensure the washing machine is level and all transit bolts have been removed. Check that the laundry is evenly distributed in the drum. Avoid overloading the machine.
Check the drain hose for kinks or blockages. Ensure the pump filter is clean and not obstructed. If the problem persists, contact a service technician.
Leave the door slightly open after each wash to allow the drum to dry. Regularly clean the detergent drawer and run a maintenance wash using a washing machine cleaner.
It is recommended to clean the pump filter every three months or more frequently if you notice any drainage issues.
The recommended load capacity is 7kg for cottons and 3.5kg for synthetics to ensure optimal washing performance and energy efficiency.
Use cold water cycles when possible, wash full loads, and select energy-saving programs designed for efficiency.