Hotpoint NSWM 864C W UK N Quick Guide

To start a wash cycle, load your laundry into the drum, add detergent, select the desired program using the control dial, and press the start button.
Ensure the machine is plugged in, the door is closed properly, and the water supply is turned on. Check for any error codes that might indicate the issue.
Remove the detergent drawer by pulling it out until it stops, then press down on the release button. Clean it under warm water and use a brush to remove any residues.
Regularly clean the detergent drawer, check and clean the filter, and run an empty hot wash cycle with a washing machine cleaner to prevent buildup.
Check the drain hose for kinks or blockages, ensure the pump filter is clean, and verify the drain pump is functioning correctly.
Ensure the load is balanced, select a higher spin speed if appropriate, and confirm that the drain and spin functions are not blocked.
Ensure the washing machine is level, the transit bolts are removed, and the load is balanced. Adjust the feet if necessary to stabilize the machine.
Leave the door open after each wash to let the interior dry, regularly clean the drum and door seal, and use a washing machine cleaner monthly.
Yes, use the dedicated 'Delicates' program on the control panel, which is designed for gentle washing of delicate fabrics.
Error code F05 indicates a problem with the drainage system. Check the pump filter and drain hose for blockages and ensure the drain pump is operational.