Hotpoint NSWM 845C GG UK N Quick Guide

To start a wash cycle, load your laundry, add detergent, close the door, select the desired wash program using the program dial, and press the start/pause button.
Ensure that the machine is properly plugged in, the door is completely closed, and the water supply is turned on. Also, check if the child lock is activated.
Remove the detergent drawer by pressing the release mechanism and pulling it out. Rinse it under warm water to remove any residue. Dry it thoroughly before reinserting.
The maximum load capacity for this washing machine model is 8 kg.
Ensure that the washing machine is level on the floor and that all transit bolts have been removed. Check that the load is balanced inside the drum.
To perform a drum clean cycle, run the machine empty on a hot wash cycle with a drum cleaner or a mixture of vinegar and baking soda.
Check the drain hose for kinks or blockages, and ensure the pump filter is clean. Make sure that the height of the drain hose is not too low or too high.
Yes, you can pause the wash cycle by pressing the start/pause button. Ensure that the water level is not too high before opening the door.
Select your desired wash program, then use the spin speed button to adjust the spin speed according to your preference.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the filter monthly. Ensure the washing machine is leveled and free of any foreign objects.