Hotpoint NSWM 1045C GG UK N Quick Guide
![Hotpoint NSWM 1045C GG UK N Washing Machine manual cover](/images/zJAcuklxswusSNrxaaAMnenu/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add detergent to the designated compartment. Turn the dial to select the desired wash program. Press the 'Start/Pause' button to begin the cycle.
Ensure the machine is plugged in and the power is on. Check if the door is fully closed. Confirm that the water supply is connected and turned on. If the problem persists, try resetting the machine by unplugging it for a few minutes.
To clean the detergent drawer, pull it out gently but firmly. Remove any residual detergent and rinse under warm water. Use a soft brush to clean any buildup. Dry it thoroughly before reinserting.
Regular maintenance includes cleaning the detergent drawer, door seal, and filter. Run a monthly cleaning cycle with a washing machine cleaner or vinegar to prevent limescale and detergent buildup.
Ensure the machine is level and stable. Check for any foreign objects in the drum or filter. Make sure the transit bolts have been removed if the machine is newly installed.
Check the drain hose for kinks or blockages. Clean the pump filter located at the bottom of the machine. If the problem persists, there may be a clog in the plumbing.
Leave the door slightly open after each wash to allow moisture to escape. Use the correct amount of detergent to avoid residue. Regularly run a maintenance wash with vinegar or a washing machine cleaner.
Wipe the door seal with a damp cloth after each use to remove any trapped lint or detergent. For a deeper clean, use a mild detergent solution and rinse thoroughly.
After selecting your wash program, use the spin speed button to adjust the speed according to your preference. Refer to the program chart in the manual for recommended speeds.
Ensure the spin cycle is set to an appropriate speed. Check if the load is balanced. Avoid overloading the machine. If necessary, run an additional spin cycle.