Hotpoint NSWF 945C W UK N Energy Guide
![Hotpoint NSWF 945C W UK N Washing Machine manual cover](/images/grhXTzwUBlOaxkErfzOSGMjX/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry, add detergent, close the door, select the desired program using the control dial, and press the start/pause button.
Ensure the machine is plugged in, the door is properly closed, and the water supply is turned on. Check if the start/pause button has been pressed.
Remove the detergent drawer by pulling it out until it stops, then press the release lever to fully remove it. Rinse under warm water to remove detergent residue.
Regularly clean the detergent drawer, check and clean the drain pump filter, and run a maintenance wash with a washing machine cleaner to prevent build-up.
Check hoses for leaks, ensure the detergent drawer is not overfilled, and inspect the door seal for damage. Tighten any loose connections.
Ensure the machine is on a level surface, check that all transit bolts have been removed, and distribute laundry evenly in the drum.
Sort laundry by fabric type and color, do not overload the machine, and use the correct amount of detergent. Select the appropriate wash cycle for your load.
Check the drain hose for blockages, ensure it is not kinked, and inspect the pump filter for obstructions. Clean as necessary.
Leave the door slightly open after washes to allow air circulation, regularly clean the drum, and use a washing machine cleaner monthly.
Turn off the machine and unplug it from the power source for a few minutes. Plug it back in and turn it on to reset the system.