Hotpoint NSWF 945C GG UK N Energy Guide
![Hotpoint NSWF 945C GG UK N Washing Machine manual cover](/images/guwOSnEzZJsTHeDTIAZfMPag/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry, add detergent, close the door, select your desired program using the dial, and press the start button.
Check the drain hose for kinks or blockages, ensure the pump filter is clean, and make sure the drain hose is positioned correctly.
Regularly clean the detergent drawer and pump filter, check and clean the door seal, and run a maintenance wash cycle with a washing machine cleaner.
Select your wash program, then use the spin speed button to adjust to the desired speed before starting the wash cycle.
Ensure the machine is level by adjusting the feet, check if the load is balanced, and avoid overloading the drum.
Open the filter access door at the bottom front, unscrew the filter cap, remove any debris, and rinse it under water before replacing it.
Leave the door slightly open after use to allow air circulation, regularly clean the door seal, and run a hot wash with a machine cleaner monthly.
Load your laundry, select the wash program, then press the delay start button to set the desired delay time before pressing start.
Ensure the water supply is turned on, check the hoses for blockages or kinks, and make sure the door is properly closed.
Turn off the machine, unplug it from the power source, wait a few minutes, then plug it back in and turn it on to reset.