Hotpoint NSWF 743U GG UK N Energy Guide

To start a washing cycle, first load your laundry into the drum. Add the appropriate amount of detergent in the detergent drawer. Close the door and select the desired wash program using the control dial. Press the 'Start/Pause' button to initiate the cycle.
Check if the drain hose is clogged or kinked. Ensure that the drain pump filter is clean. If the problem persists, there may be an issue with the pump, and professional service might be required.
Remove the detergent drawer by pulling it out until it stops, then press down on the release lever. Rinse the drawer under warm water to remove any residue. Dry it thoroughly before reinserting it into the machine.
Regularly clean the detergent drawer and door seal to prevent mold. Inspect and clean the drain pump filter every few months. Run an empty hot wash cycle with a washing machine cleaner to keep the drum fresh.
Ensure the washing machine is level on the floor. Adjust the feet if necessary. Make sure the load is balanced inside the drum. Avoid overloading the machine, and distribute garments evenly.
Refer to the user manual to identify the error code meaning. Follow the suggested troubleshooting steps. If the issue is not resolved, contact Hotpoint customer support for further assistance.
Use lower temperature settings for most washes. Select eco-friendly wash cycles when possible. Ensure the machine is fully loaded but not overloaded. Regular maintenance can also improve efficiency.
Odors can be caused by residue buildup. Run an empty hot wash with a washing machine cleaner or white vinegar. Clean the door seal and detergent drawer regularly to prevent future odors.
Press the 'Start/Pause' button to pause the cycle. Wait a few seconds for the door to unlock before opening it. To resume the cycle, close the door and press the 'Start/Pause' button again.
Yes, you can wash delicate fabrics using the dedicated 'Delicates' program, which uses a gentle wash action and lower spin speed to protect your delicate items.