Hotpoint NM11 964 WC A UK N Quick Guide
![Hotpoint NM11 964 WC A UK N Washing Machine manual cover](/images/elzQFEKpCLTqXoAsvgLfNHFK/thumbs/thumb175x175.webp)
To select a wash cycle, turn the program dial to your desired program. The LED screen will display the selected cycle, and you can adjust settings like temperature and spin speed using the buttons on the control panel.
Ensure the door is fully closed and latched. Check if the washing machine is plugged in and the power is on. Also, verify that the water supply is turned on and the Start/Pause button has been pressed.
To clean the detergent drawer, remove it by pulling it out and pressing the release lever. Wash the drawer with warm water to remove any detergent residue and dry it completely before reinserting it into the machine.
Ensure the washing machine is level by adjusting the feet. Check that the load is balanced and not overloaded. Remove any transit bolts if they have not been removed after installation.
Run an empty wash cycle using a drum cleaner or a mix of white vinegar and baking soda. Set the machine to the hottest wash temperature to remove residue and prevent odors.
Check the drain hose for kinks or blockages. Ensure the filter is clean and free of debris. If issues persist, there may be a problem with the pump that requires professional service.
Use cold water cycles whenever possible, wash full loads instead of partial ones, and select energy-saving or eco modes available on the machine.
Refer to the user manual for a list of error codes and their meanings. Most errors can be resolved by checking connections, ensuring proper water supply, or resetting the machine.
Distribute clothes evenly around the drum without overloading. Mix large and small items to balance the load, and avoid packing clothes too tightly.
Leave the door and detergent drawer open after each wash to allow air circulation. Regularly clean the door seal and run maintenance cycles to prevent mold buildup.