Hotpoint NM11 964 BC A UK N Quick Guide
![Hotpoint NM11 964 BC A UK N Washing Machine manual cover](/images/SlxtnFRmlVffsRxUdSRjzzjn/thumbs/thumb175x175.webp)
To reset the washing machine, turn the dial to the 'Off' position, wait for a few minutes, and then select your desired wash program again.
Ensure the door is properly closed, the machine is plugged in, and the water supply is turned on. Additionally, check if the program has been selected and the 'Start/Pause' button has been pressed.
Remove the detergent drawer by pulling it out and pressing the release catch. Rinse it under warm water to remove any detergent residue and replace it back into the compartment.
The maximum load capacity of the washing machine is 9 kg for cotton fabrics. Ensure not to overload the machine as it could affect washing performance.
Excessive vibration can be caused by an unbalanced load. Try redistributing the clothes evenly in the drum. Additionally, ensure the machine is on a flat, stable surface.
Select the 'Drum Clean' program or run an empty cycle with hot water and add a drum cleaner or white vinegar to remove any build-up inside the drum.
Refer to the user manual for a detailed explanation of each error code. Common codes include F01 for motor issues and F05 for drainage problems.
It is recommended to clean the filter every three months to ensure optimal performance and to prevent blockages.
Yes, press the 'Start/Pause' button to pause the cycle. Wait for the door lock to release, then open the door to add more clothes. Close the door and press 'Start/Pause' again to resume.
Leave the door open after each wash to allow the interior to dry. Regularly clean the door seal and run monthly maintenance washes with a machine cleaner.