Hotpoint HSFCIH 4798 FS UK Energy Guide
![Hotpoint HSFCIH 4798 FS UK Dishwasher manual cover](/images/MRCrRhvxKjsyIZSapiBvORVl/thumbs/thumb175x175.webp)
To properly load dishes, place larger items such as pots and pans on the bottom rack and smaller plates and glasses on the top rack. Ensure that items are not blocking the spray arms and that they are tilted to allow water to drain effectively.
First, ensure that the dishwasher is properly plugged in and that the circuit breaker is not tripped. Check that the door is fully closed and latched. If the problem persists, refer to the user manual for troubleshooting steps or contact customer support.
To clean the filter, remove the lower rack and locate the filter assembly at the bottom of the dishwasher. Twist the filter counterclockwise and lift it out. Rinse it under running water to remove debris, and then replace it by aligning it properly and twisting it clockwise.
Ensure that you are using a rinse aid to improve drying performance. Check that the selected wash program includes a drying phase. If the problem continues, inspect the heating element for any faults.
To reset the dishwasher, press and hold the start button for a few seconds until the machine turns off. Wait for a minute, then press the start button again to turn it back on.
Ensure that the dishwasher is cleaned regularly. Run an empty cycle with a dishwasher cleaner or a mixture of vinegar and baking soda. Check for any food debris in the filter or around the door seal.
To change the wash cycle, press the program button until the desired cycle is displayed. Refer to the control panel or user manual for specific cycle descriptions.
Yes, but ensure that the plastic items are labeled dishwasher-safe. Place them on the top rack to avoid exposure to the heating element, which can cause warping.
Regularly clean the filter and spray arms, use a rinse aid, and occasionally run an empty cycle with a dishwasher cleaner to remove limescale and grease.
Check for blockages in the filter or drain hose. Ensure that the dishwasher is level and inspect the door seal for any damage. If the problem persists, consult a technician.