Hotpoint HFC 3C26 WC X UK Energy Guide
![Hotpoint HFC 3C26 WC X UK Dishwasher manual cover](/images/uTzMsHBIPCegKFhBKlJZDywR/thumbs/thumb175x175.webp)
To reset your Hotpoint dishwasher, press and hold the start/reset button for about 3 seconds until the indicator lights flash. This will reset the dishwasher to its default settings.
First, check the drain hose for any kinks or blockages. Ensure the sink drain is clear. You can also clean the filter and pump area inside the dishwasher. If the problem persists, consult the user manual or contact customer service.
Ensure that you are using a rinse aid, as this helps with drying efficiency. Also, try using higher temperature settings if available, and ensure that the dishes are loaded in a way that allows water to drain off completely.
Remove the lower dish rack and locate the filter at the bottom of the dishwasher. Twist and pull out the filter, then rinse it under warm running water. Use a soft brush to remove stubborn debris. Reassemble the filter before using the dishwasher again.
Noises could be due to items in the dishwasher touching each other. Ensure that dishes are loaded correctly and not obstructing the spray arms. If the noise persists, check for loose parts or debris in the spray arms and filter.
Regularly clean the filter and check for any food debris inside the dishwasher. Run a cleaning cycle with a dishwasher cleaner or a cup of white vinegar placed in the top rack. Leave the door slightly ajar when not in use to allow air circulation.
It is recommended to use detergents specifically designed for dishwashers. You can use powder, gel, or tablet forms. Avoid using regular dish soap as it may cause excessive suds and damage the machine.
The Eco program is designed to save energy and water. It uses lower temperatures and longer wash cycles to efficiently clean dishes while minimizing environmental impact.
It is a good practice to check and clean the spray arms every few months. Remove them and rinse under running water, using a toothpick or similar tool to clear any blocked nozzles.
Check the door seal for any damage or debris. Ensure the door is closing properly and that the dishwasher is level. Inspect the hoses and connections for leaks. If the issue continues, contact a service technician.