Hotpoint HFC 2B19 X UK N Energy Guide

To start a wash cycle, load your dishes, add detergent, close the door, select the desired program using the control panel, and press the start button.
Check if the water supply is turned on, ensure that the inlet hose is not kinked, and verify that the inlet valve filter is clean. Also, make sure the door is fully closed.
It is recommended to clean the filter every month to ensure optimal performance and prevent blockages.
Check for blockages in the drain hose or filter, ensure the drain hose is not kinked, and inspect the sink drain connection. Clean any obstructions if necessary.
Ensure that the dishwasher is level and securely installed. Check that dishes are loaded properly and not touching each other. Additionally, make sure the spray arms can rotate freely.
Load larger items like pots and pans on the bottom rack, and place plates and bowls so that they face the center. Use the top rack for glasses and smaller items, and ensure all items are angled to allow water to drain.
No, you should only use detergent specifically designed for dishwashers. Using regular dish soap can cause excessive suds and potentially damage the appliance.
Refer to the user manual to identify the meaning of the error code. Common fixes include checking water supply, filter cleaning, or resetting the machine by turning it off and on again.
Regularly clean the filter, check and clean the spray arms, inspect and clean the door seals, and run an empty cycle with dishwasher cleaner monthly.
Ensure that you are using the correct amount of detergent and rinse aid. Check that the water temperature is set correctly, ideally between 120-150°F (49-65°C).