Hotpoint HBNF 55181 B AQUA UK 1 Energy Guide

To change the temperature settings, locate the control panel inside the fridge compartment. Use the temperature adjustment buttons to set your desired temperature.
Ensure the freezer door is fully closed and the seal is intact. Check the temperature settings and adjust if necessary. If the issue persists, defrost the freezer and clean the vents.
This model typically does not require manual defrosting as it is equipped with a frost-free system. However, if you notice ice build-up, manually defrost and clean the unit.
To clean the water dispenser, first disconnect the fridge from power. Remove the dispenser parts and wash them with warm, soapy water. Rinse thoroughly and dry before reassembling.
Ensure the unit is level and stable. Check that it is placed on a flat surface and not touching any walls or cabinets. Regularly clean the condenser coils to prevent overheating and noise.
Water pooling can result from a blocked defrost drain. Clear the drain hole using a pipe cleaner or similar tool to ensure proper drainage.
Unplug the appliance from the power source. Remove the light cover inside the fridge, unscrew the old bulb, and replace it with a new one of the same type and wattage.
A humming noise is usually normal and indicates the compressor is working. If the noise is loud, inspect the compressor and fan for any obstructions or damage.
Yes, the door swing direction can be changed. Refer to the user manual for detailed instructions on removing and reattaching the doors to swing from the opposite side.
Check that the vents inside the fridge are not blocked. Ensure the doors are sealing properly and adjust the temperature setting to a cooler setting if necessary.