Hotpoint H84BE 72 XO3 UK 2 Energy Guide
![Hotpoint H84BE 72 XO3 UK 2 Fridge Freezer manual cover](/images/VPggSRIWlWZDooMEdxIXmJJe/thumbs/thumb175x175.webp)
To adjust the temperature, locate the control panel inside the fridge section. Use the up and down buttons to set your desired temperature for both the fridge and freezer compartments.
Ensure that the appliance is plugged in and the power is on. Check the temperature settings and make sure the doors are sealing properly. If the issue persists, consider cleaning the condenser coils or contacting customer service.
The Hotpoint H84BE 72 XO3 UK 2 features a frost-free system, so manual defrosting is not necessary. However, regular cleaning of the interior is recommended.
Use a soft cloth with mild detergent and warm water to clean both the interior and exterior surfaces. Avoid abrasive cleaners. Remove all shelves and drawers for thorough cleaning.
To replace the light bulb, unplug the appliance and remove the light cover by unscrewing it. Replace the bulb with a new one of the same type and wattage, then reattach the cover.
Ice buildup can occur if the door is not sealing properly or if there is a fault in the defrost system. Check the door gaskets and ensure they are clean and intact. If the problem continues, consult a technician.
Unusual noises can be due to the appliance not being level or items inside vibrating. Ensure the fridge freezer is on a stable, flat surface and check for any loose items. Persistent noise may require professional inspection.
Refer to the user manual to find the specific button combination to activate holiday mode, which helps save energy by maintaining a stable temperature while you are away.
Store raw meat separately from cooked food and ensure all items are covered or sealed. Use the shelves and drawers to organize your food efficiently, and avoid overloading the compartments to maintain airflow.
To reset the appliance, unplug it from the power source, wait for about 10 minutes, and then plug it back in. This can help resolve minor issues. If problems persist, contact customer support.