Hotpoint H8 D93WB UK Energy Guide
![Hotpoint H8 D93WB UK Dryer manual cover](/images/rSFzReKCGpYivBbdJQdsicHM/thumbs/thumb175x175.webp)
To start a drying cycle, load your laundry into the drum, close the door securely, select the desired drying program using the control dial, and press the start button.
Ensure the dryer is properly plugged in and the circuit breaker is not tripped. Check if the selected program requires heat. Clean the lint filter and check the exhaust vent for blockages. If the issue persists, contact a service technician.
Open the dryer door and locate the lint filter at the bottom of the door opening. Pull it out and remove any lint. Rinse the filter under running water and let it dry before reinserting it into the dryer.
Regular maintenance includes cleaning the lint filter after each use, inspecting and cleaning the exhaust vent periodically, and checking for any obstructions around the dryer. An annual check-up by a professional is recommended.
Check the lint filter and exhaust vent for blockages. Ensure the load is not too large or too wet. Verify that the selected program is appropriate for the fabric type. If the problem continues, the heating element might need inspection.
It's best to dry similar fabric types together to ensure even drying and to prevent damage. Use the appropriate drying program for each fabric type as specified in the user manual.
To reset the dryer, unplug it from the power source for a few minutes, then plug it back in. This can often resolve minor electronic glitches. For persistent issues, consult the user manual or contact a technician.
Some noise is normal, such as the sound of clothes tumbling or the motor running. However, loud or unusual noises like grinding or banging may indicate a problem and should be investigated.
Check for any obstructions around the door seal or latch. Ensure the load is not preventing the door from closing. If the door still won't close, inspect the latch mechanism for damage or wear.
To prevent wrinkles, avoid overloading the dryer and remove clothes promptly after the cycle ends. Use the wrinkle-free or easy iron program if available. Consider using fabric softener or dryer sheets.