Hotpoint H3 D81GS UK Energy Guide

To clean the lint filter, open the dryer door and locate the filter at the base of the door opening. Remove the filter by pulling it upwards, then clean off any lint by hand or with a soft brush. Replace the filter before using the dryer again.
First, ensure that the dryer is plugged in and that the circuit breaker is not tripped. Check the settings to make sure it is not set to an 'Air Dry' or 'No Heat' option. If the problem persists, it may require checking the heating element or contacting a professional technician.
Ensure that the dryer is level and on a stable surface. Check for any loose items like coins in the drum. If the noise continues, inspect the drum rollers and belt for wear or damage.
Check the lint filter and exhaust vent for blockages, as this can restrict airflow. Ensure that the dryer is not overloaded and that the selected cycle is appropriate for the load size. Consider cleaning the vent system if the problem continues.
Regular maintenance includes cleaning the lint filter after each use, checking the exhaust vent for blockages monthly, and wiping the drum with a damp cloth to remove any residue. Inspect the power cord and plug for damage regularly.
To reset your Hotpoint dryer, disconnect it from the power supply by unplugging it or turning off the circuit breaker for about 5 minutes. Reconnect the power and attempt to start the dryer again.
Yes, you can stack your Hotpoint dryer on top of a compatible washing machine using a stacking kit designed for your model. Ensure that both appliances are level and that the stacking kit is securely installed.
To clean the exterior, use a soft, damp cloth with a mild detergent. Avoid abrasive cleaners or scouring pads that may damage the finish. Dry with a clean cloth after cleaning.
Check that the dryer is plugged in and that the door is fully closed. Ensure that the cycle selection is correct and that the start button is fully pressed. If the issue persists, check the power supply or consult a technician.
To reduce wrinkles, remove clothes promptly at the end of the drying cycle and fold or hang them immediately. Use the 'Wrinkle Care' option if available, and avoid overloading the dryer.