Hotpoint ActiveCare NM11 945 WC A UK N Quick Guide
![Hotpoint ActiveCare NM11 945 WC A UK N Washing Machine manual cover](/images/EmsyTPLdGSsOArsGdbJURuIb/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add the appropriate amount of detergent, select your desired wash program using the control dial, and press the start/pause button.
Ensure the drain hose is not kinked or clogged. Check the pump filter for blockages and clean it if necessary. Make sure the drain hose is installed at the correct height.
Remove the detergent drawer by pressing the release button and pulling it out. Rinse the compartments under warm water to remove any detergent buildup. Use a brush for stubborn residues.
Excessive vibration may occur if the machine is not level. Adjust the feet to ensure stability. Also, avoid overloading the machine or washing single heavy items.
Run an empty wash cycle using the hottest setting and a cup of white vinegar or a washing machine cleaner to remove detergent residues and prevent odors.
After each wash, leave the door slightly open to allow the drum to dry. Regularly clean the door seal and detergent drawer to prevent mold buildup.
To reset the machine, unplug it from the power outlet, wait for a few minutes, and then plug it back in. This may resolve minor electronic issues.
Refer to the user manual to identify the error code. Follow the troubleshooting steps provided, which may include checking connections or contacting a service professional.
It is recommended to clean the pump filter every three months to ensure it is free from lint, coins, and other debris that may hinder drainage.
Yes, you can wash delicate fabrics using the dedicated gentle or delicates wash cycle. Use a mesh laundry bag and a mild detergent for added protection.