Hotpoint ActiveCare NDD 9636 DA UK Energy Guide
![Hotpoint ActiveCare NDD 9636 DA UK Washer Dryer manual cover](/images/xKlWZYffwEmjCReInFGGoIjQ/thumbs/thumb175x175.webp)
To reset the washer dryer, unplug the appliance from the power source for a few minutes. Then, plug it back in and turn it on to see if the issue is resolved.
Check if the drain hose is clogged or kinked. Make sure the drain pump filter is clean and free from debris. If the problem persists, consult the user manual or contact customer support.
Use a lower heat setting for drying and refer to the care labels on your clothing. Consider using the 'Easy Iron' or 'Delicate' cycle for sensitive fabrics.
Regularly clean the detergent drawer and drum. Check and clean the door seal to prevent mold. Ensure the filter is cleaned monthly to maintain efficient operation.
Ensure the washer dryer is level on the floor. Avoid overloading it and distribute clothes evenly. Check that all transit bolts have been removed if the unit is new.
Make sure the door is fully closed and latched. Check that the power cord is properly plugged in and that the water supply is turned on.
Remove the detergent drawer by pulling it out and pressing the release button. Rinse it under warm water to remove any residue. Dry it thoroughly before reinserting it.
Refer to the user manual to identify the error code. Most codes indicate specific issues like water supply problems or door lock malfunctions. Follow the suggested troubleshooting steps or contact support if needed.
It's best to wash and dry fabrics of similar types together to avoid damage. Use the appropriate cycle settings for mixed loads if necessary, and always check fabric care labels.
Distribute clothes evenly around the drum, separating heavy and light items. Avoid overloading, as this can affect cleaning and drying efficiency.