Horizon Fitness T101-05 2018 Owner's Manual
![Horizon Fitness T101-05 2018 Treadmill manual cover](/images/mdyuKTPUOFHDrTOKKnWpmCUO/thumbs/thumb175x175.webp)
To set up your Horizon Fitness T101-05 treadmill, start by placing it on a stable, flat surface. Assemble the frame and console according to the instruction manual, ensuring all bolts and screws are tightened securely. Plug the treadmill into a grounded outlet and perform a quick system check to ensure everything is functioning properly.
Regular maintenance of the treadmill belt includes keeping it clean and properly aligned. Wipe it down after each use to remove sweat and debris. Lubricate the belt every three months with a silicone-based lubricant to reduce friction and wear.
First, ensure that the treadmill is plugged in and the safety key is inserted correctly. Check the circuit breaker on the treadmill and your home's electrical panel. If the treadmill still doesn't start, consult the manual for further troubleshooting steps or contact customer support.
If the belt is slipping, it may need tightening. Locate the adjustment bolts at the rear of the treadmill and turn them clockwise to tighten the belt. Make small adjustments and check the belt tension after each adjustment to ensure it is not too tight.
To calibrate the speed, enter the engineering mode by holding down specific buttons as instructed in the manual. Follow the calibration instructions provided to ensure the treadmill's speed matches the display readings.
Refer to the error code section in your manual to identify the issue. Common codes may indicate problems like motor errors or power supply issues. Follow the troubleshooting steps provided or contact customer support for assistance.
It is recommended to lubricate the treadmill belt every three months or after 150 miles of use. Use only silicone-based lubricants to maintain optimal belt performance and longevity.
To fold the treadmill, first ensure it is turned off and unplugged. Lift the deck until it locks into place. To store, keep it in a dry, cool area to prevent damage. Make sure to lock the deck securely to prevent accidental unfolding.
Adjust the incline using the incline buttons on the console. The treadmill offers a range of incline settings to simulate different terrains and enhance your workout intensity.
Unusual noises can result from loose parts or lack of lubrication. Check that all bolts and screws are tight, and lubricate the belt if necessary. If the noise persists, consult the manual or contact customer support for further guidance.