Horizon Fitness EX59-04 Owner's Manual
![Horizon Fitness EX59-04 Elliptical manual cover](/images/lWvFhZVbxophwJaodseMMVwx/thumbs/thumb175x175.webp)
Start by laying out all parts and tools included in the package. Follow the step-by-step instructions provided in the manual, ensuring each part is securely fastened before moving to the next step. Pay special attention to the wiring and connections to avoid pinching or damage.
Check the power source to ensure the elliptical is properly plugged in. Inspect the power cord for any visible damage. If everything appears to be in order, reset the console by unplugging the machine for a few minutes and plugging it back in.
Ensure that the elliptical is placed on a level surface. Tighten any loose bolts or screws. Regularly lubricate the moving parts as specified in the maintenance section of the user manual.
Wipe down the machine after each use to prevent sweat buildup. Inspect and tighten bolts monthly. Lubricate the joints every six months or as needed. Check the power cord and electronics periodically for wear.
Use the console to navigate to the resistance settings. You can increase or decrease resistance using the up and down arrows on the display. Refer to the user manual for specific program settings.
Inspect the pedals and footpads for any obstructions. Check for loose bolts and tighten them. Lubricate the joints and moving parts to ensure smooth operation.
Yes, the elliptical is equipped with transport wheels. To move it, ensure the machine is unplugged, then tilt it gently onto the wheels to roll it to the desired location. Take care not to damage the floor or the machine.
The console display provides various metrics such as time, distance, calories, and heart rate. You can track your progress by entering your age and weight for more accurate readings. Some models may also offer Bluetooth connectivity for fitness apps.
The maximum user weight capacity for the Horizon Fitness EX59-04 Elliptical is 275 pounds. Exceeding this limit may cause damage to the machine and void the warranty.
Make sure your hands are clean and dry before placing them on the sensors. Ensure the sensors are clean and not obstructed. If the reading is inconsistent, try repositioning your grip or slightly moistening your hands for better conductivity.