Hoover VTV 57NCB-80 User Manual

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, close the door, select your desired wash program using the control dial, and press the start button.
First, check if the drain hose is clogged or kinked. Clear any blockages and ensure the hose is positioned correctly. If the problem persists, inspect the pump filter for debris and clean it if necessary.
Remove the detergent drawer by pulling it out and pressing the release lever. Soak it in warm water and scrub with a soft brush to remove residue. Rinse thoroughly before reinserting it into the machine.
Excessive vibration can be caused by an unbalanced load. Ensure clothes are evenly distributed in the drum. Overloading or underloading can also cause vibration. Adjust the load size accordingly.
To reset the machine, unplug it from the power source and wait about 30 seconds. Plug it back in and power on the machine. This should reset the control board.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the drain pump filter, inspecting hoses for leaks, and running a drum cleaning cycle with a suitable cleaner.
Use cold water wash cycles when possible, and ensure the machine is fully loaded to maximize efficiency. Regularly maintain the machine to ensure it operates efficiently.
If the door remains locked, ensure the cycle is complete, and the machine has drained. Wait a few minutes for the lock mechanism to release. If it remains locked, unplug the machine and seek professional assistance if needed.
Leave the door slightly ajar after each wash to allow the drum to dry. Regularly clean the gasket and drum with a mild detergent or a vinegar solution to prevent mold buildup.
Run an empty cycle with a drum cleaning detergent or a mixture of vinegar and baking soda. This will help remove any residue or odors. Ensure to wipe the drum and door seal dry after the cycle.