Hoover VHC791XT-86S User Manual
![Hoover VHC791XT-86S manual cover](/images/ANkHvhAfFXYjpRMKshVhsQsK/thumbs/thumb175x175.webp)
To clean the filter, open the filter compartment, remove the filter, and wash it under warm water. Allow it to dry completely before reinserting it back into the dryer.
Ensure the dryer is plugged in and the circuit breaker is not tripped. Check if the door is properly closed and the start button is pressed firmly.
Check if the lint filter is clean and the venting system is not blocked. Ensure the load size is appropriate and not exceeding the dryer’s capacity.
Ensure the dryer is leveled and stable on the ground. Check for any loose items in the drum or foreign objects stuck in the filter or vent.
Error code E03 typically indicates a drainage issue. Check the drain hose for any blockages or kinks, and ensure the pump filter is clean.
Regular maintenance should be performed every 3 months, including cleaning the filter, checking the vent system, and inspecting for any wear and tear.
Yes, you can dry shoes using a low heat setting. It is recommended to use a drying rack or towel to prevent them from tumbling inside the drum.
Most fabrics can be safely dried, including cotton, synthetic, and mixed fabrics. Always check the care label on garments for specific drying instructions.
Turn the program selector dial to the desired drying cycle, then use the timer button to set the drying time as needed.
Inspect the door latch for any obstruction or damage. Ensure the door seal is clean and properly aligned. Adjust the door hinge if necessary to ensure proper closure.