Hoover VHC380-80 User Manual
![Hoover VHC380-80 manual cover](/images/twWvJUFoEogUsjKJjiXQXwal/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the filter at the bottom of the door opening. Pull it out gently and remove any lint by hand. Rinse the filter under running water and let it dry completely before reinserting it.
Ensure the dryer is plugged in and the power supply is working. Check the door is closed properly and the start button is pressed. If the problem persists, check the circuit breaker or fuses.
Ensure the dryer is level and on a stable surface. Check for any loose items or foreign objects in the drum or filter area that could be causing noise.
Check if the lint filter is clean and the exhaust vent is clear of obstructions. Ensure the load size is appropriate and not too large for efficient drying.
Regularly clean the lint filter and check the exhaust vent for blockages. Wipe down the drum and exterior with a damp cloth to maintain cleanliness.
To reset the dryer, unplug it from the power outlet for a few minutes, then plug it back in. This can help resolve minor electronic glitches.
Refer to the user manual for the specific error code to determine the cause and possible solutions. If necessary, contact Hoover customer support for assistance.
It is not recommended to dry shoes in the dryer as it can cause damage to both the shoes and the appliance. Consider using a shoe drying rack or air drying instead.
Refer to the program chart in the user manual to select the appropriate cycle based on fabric type and desired dryness level. Always separate laundry by fabric type for best results.
Avoid overloading the dryer and ensure the lint filter is clean before each use. Do not dry items contaminated with flammable substances. Regularly inspect the power cord and plug for damage.