Hoover SM550AC 001 Instruction Manual
![Hoover SM550AC 001 manual cover](/images/isRvctJWvhCnzjJKSkJBVlHQ/thumbs/thumb175x175.webp)
To assemble the Hoover SM550AC 001, attach the handle to the main body by aligning the grooves and securing it with the provided screws. Connect the hose to the nozzle and ensure all attachments click into place.
Check if the dust bag is full and replace it if necessary. Also, inspect the filters for clogs or damage and clean or replace them as needed. Ensure that there are no blockages in the hose or nozzle.
Remove the filter from the vacuum cleaner, rinse it under cold water until the water runs clear, and let it air dry completely before reinstalling. Do not use soap or detergents.
The Hoover SM550AC 001 uses Type Y disposable dust bags. Ensure you are using the correct type to maintain optimal performance.
It is recommended to change the dust bag once it is two-thirds full or when there is a noticeable decrease in suction power. Regularly check the bag to maintain efficiency.
The vacuum may shut off automatically due to overheating. Check for blockages in the hose, ensure the filters are clean, and allow the unit to cool down before restarting.
Regularly replace dust bags and clean filters, inspect the power cord for damage, and check for any blockages in the hose or nozzle. Store the vacuum in a dry place when not in use.
Ensure that the power cord is plugged in securely, check the outlet for power, and inspect the vacuum for any blown fuses or tripped breakers. If issues persist, seek professional repair services.
Turn off and unplug the vacuum. Remove the bottom plate to access the brush roll. Slide off the old belt and replace it with a new one by looping it over the motor shaft and brush roll. Reattach the bottom plate.
No, the Hoover SM550AC 001 is not designed for wet vacuuming. Using it on wet surfaces can damage the motor and void the warranty. Only use it on dry surfaces.