Hoover NDEH11RA2TCEXM80 User Manual
![Hoover NDEH11RA2TCEXM80 manual cover](/images/JqKUrmHjwVIpGHrnhXzdyTnd/thumbs/thumb175x175.webp)
To clean the lint filter, first ensure the dryer is off. Open the door and locate the lint filter at the base of the opening. Pull it out gently, remove any lint, and wash it under running water. Allow it to dry completely before reinserting.
Ensure the lint filter and condenser unit are clean. Check that the dryer is not overloaded and that the selected drying cycle is appropriate for the load. Also, verify that the air vents are not blocked.
To reset the dryer, turn it off and unplug it from the power outlet. Wait for about 5 minutes, then plug it back in and turn it on. This should reset the machine.
Error code E03 indicates a drainage issue. Check if the water tank is full and needs emptying. Also, inspect the drainage hose for any kinks or blockages.
The condenser should be cleaned every month to ensure optimal performance. Remove it from the dryer, rinse under running water, and let it dry completely before reinstalling.
Yes, fabric softener sheets can be used in the Hoover NDEH11RA2TCEXM80. However, use them sparingly to avoid residue buildup on the lint filter and inside the drum.
Regular maintenance includes cleaning the lint filter after each use, emptying the water tank, and cleaning the condenser monthly. Periodically check the drum and door seals for wear and clean them as needed.
Refer to the user manual for guidance on cycle selection based on fabric type and desired drying level. The control panel provides options for various materials like cotton, synthetics, and delicates.
Unusual noises can result from objects caught in the drum or a loose item within the dryer. Inspect the drum interior and remove any foreign objects. Ensure the dryer is level and stable.
To improve energy efficiency, clean the lint filter after each use, avoid overloading the dryer, use appropriate drying cycles, and ensure proper ventilation around the appliance.