Hoover LS HD 73 MUK User Manual
![Hoover LS HD 73 MUK manual cover](/images/hZAAKbyXVZNKRmUJSHHARgQJ/thumbs/thumb175x175.webp)
To reset the Hoover LS HD 73 MUK, unplug the machine from the power source, wait for about 1-2 minutes, then plug it back in. This should reset the machine's programming.
First, check the drain hose for any blockages or kinks. Ensure that the hose is positioned correctly. If the problem persists, inspect the pump filter for any debris or lint that may be obstructing proper drainage.
Remove the detergent drawer by pulling it out gently. Clean it with warm water and a soft brush to remove any detergent residue or mold. Ensure it is completely dry before reinserting it into the machine.
Excessive vibration can be caused by an unbalanced load. Make sure the laundry is evenly distributed. Also, check that the machine is level on the floor. Adjust the feet if necessary to stabilize the machine.
Regularly clean the detergent drawer and pump filter, check and clean the door seal, and ensure the drum is clean by running a maintenance wash with an empty load using a drum cleaner.
Leave the door slightly open after each cycle to allow the drum to dry. Regularly clean the door seal and run a monthly maintenance wash with a washing machine cleaner to prevent odor buildup.
Ensure the cycle has fully completed and that the child lock is not activated. If the door remains locked, try turning the machine off and on again. If necessary, manually release the door by consulting the user manual for instructions.
Check that the machine is properly plugged in and that the door is securely closed. Ensure the water supply is turned on and that the selected cycle is appropriate. If it still doesn't start, inspect the fuse or circuit breaker.
Consult the user manual for a detailed guide on wash programs. Generally, use a gentle cycle for delicate fabrics, a normal cycle for everyday wear, and a heavy-duty cycle for items like towels and bedding.
First, check for foreign objects like coins or buttons in the drum. Ensure the machine is level on the floor. If noises persist, inspect the drum bearings and motor mounts for wear or damage.