Hoover LS D 73 SY User Manual
![Hoover LS D 73 SY manual cover](/images/xhJSUVBzfFzQMLGeBvYHHPxX/thumbs/thumb175x175.webp)
To clean the filter, locate it at the bottom of the dishwasher, twist it counterclockwise, and pull it out. Rinse under warm water, scrub with a soft brush if necessary, and replace it by twisting clockwise until secure.
Check if the filter is clogged and clean it. Ensure the drain hose is not kinked or blocked. If the problem persists, inspect the drain pump for obstructions.
Ensure the dishwasher is plugged in and the door is fully closed. Check the circuit breaker and reset if necessary. Verify that the water supply is turned on.
Check if the spray arms are blocked by food particles; clean them if necessary. Ensure the detergent dispenser is working properly and use the correct amount of detergent.
Clean the filter monthly, inspect the spray arms for clogs weekly, and descale the interior every six months to ensure optimal performance.
To reset the dishwasher, turn it off and unplug it from the power source. Wait for about 10 minutes, then plug it back in and turn it on.
Inspect the spray arms and remove any obstructions. Ensure that dishes are loaded properly and not interfering with the spray arms. Check for loose items inside the dishwasher.
Place larger items like pots and pans on the bottom rack and smaller items like cups and glasses on the top rack. Ensure all items are tilted for optimal water flow and not blocking the spray arms.
Use high-quality dishwasher detergents that are suitable for automatic dishwashers. Avoid using regular dish soap, which can cause excessive sudsing.
Ensure the rinse aid dispenser is full, as rinse aid helps improve drying. Select a higher temperature setting for the drying cycle if available.