Hoover HWCB 60D User Manual

To install the Hoover HWCB 60D, ensure it is placed on a flat, level surface. Leave at least 50mm of space around the sides and back for proper ventilation. Connect to a grounded electrical outlet using the supplied power cord.
The optimal temperature setting for red wine in the Hoover HWCB 60D is between 12-18°C (54-64°F). Adjust the temperature using the digital control panel as per your preference.
If the unit is not cooling properly, check if the door is fully closed and the seal is intact. Ensure there is adequate ventilation around the unit and that the temperature settings are correct. If the problem persists, consult the user manual or contact customer support.
Unusual noises may be due to vibrations. Ensure the unit is level and on a stable surface. Check for any loose components or items inside that might be causing the noise. If the issue continues, seek professional assistance.
To clean the interior, unplug the unit and remove all bottles. Use a soft cloth with a mild detergent to wipe down the surfaces. Avoid using abrasive cleaners or solvents. Dry thoroughly before replacing the bottles.
Yes, the HWCB 60D has dual temperature zones allowing you to store red and white wines at their optimal temperatures. Adjust the zones accordingly for different wine types.
Regularly clean the unit's interior and exterior to prevent dust and debris buildup. Check and clean the door seals to ensure they are free from dirt to maintain an effective seal.
To change the light bulb, unplug the unit and remove the protective cover inside the fridge. Replace the bulb with one of the same type and wattage. Reattach the cover and plug the unit back in.
Check for any obstructions around the door seal and ensure the fridge is not overfilled. Inspect the door seal for damage and clean it if necessary. Adjust the leveling feet to ensure the unit is stable.
To maximize energy efficiency, keep the unit in a cool, well-ventilated area, away from direct sunlight and heat sources. Ensure the door remains closed as much as possible and check that the seal is intact.