Hoover HVLN 6172WH User Manual

To install your Hoover HVLN 6172WH, ensure it is placed on a level surface away from direct sunlight and heat sources. Leave a space of at least 10 cm around the appliance for ventilation. Connect it to a grounded electrical outlet and allow it to stand upright for a minimum of 4 hours before plugging it in.
Check if the temperature setting is correct. Ensure that the door seals are intact and clean. Avoid overloading the refrigerator, and ensure that air vents inside are not blocked. If the issue persists, consider contacting customer support for assistance.
The Hoover HVLN 6172WH is equipped with an automatic defrost system. However, if ice builds up, manual defrosting may be needed. Defrost your refrigerator every 6 months or when the frost layer reaches about 6-7 mm.
Disconnect the appliance from the power supply. Remove all food items and detachable shelves. Use a mixture of warm water and baking soda or mild detergent to clean the interior. Rinse with clean water and dry thoroughly before replacing shelves and food.
Locate the temperature control dial inside the refrigerator compartment. Turn the dial to a higher number for cooler temperatures or to a lower number for warmer temperatures. Allow 24 hours for the temperature to stabilize after adjusting.
Some noise is normal, such as humming or gurgling. However, if you notice loud or unusual sounds, ensure the refrigerator is level and not in contact with other surfaces. Also, check for any loose components or items inside that may be vibrating.
First, check if the bulb is securely screwed in. If the bulb is burnt out, replace it with a bulb of the same type and wattage. Ensure the refrigerator is unplugged during replacement to avoid electrical shock.
To change the door swing direction, unplug the refrigerator and remove the top hinge cover and screws. Detach the door and swap the hinges to the opposite side. Reattach the door and secure the hinges, then replace the hinge cover. Consult the manual for detailed instructions.
Store raw meat and seafood on the bottom shelf to prevent dripping onto other foods. Use airtight containers for leftovers and perishable items. Keep fruits and vegetables in the designated crisper drawers to maintain freshness.
Ensure the refrigerator doors are closed tightly and the seals are intact. Clean the condenser coils regularly to enhance efficiency. Keep the refrigerator full but not overcrowded, as this helps maintain temperature stability with less energy.