Hoover HSBSF 178XK User Manual

To set up your Hoover HSBSF 178XK, place it in a well-ventilated area with at least 5 cm of space on all sides. Plug it into a grounded electrical outlet and allow it to sit for a few hours before storing food to ensure optimal cooling.
Check if the door is sealing properly and not obstructed. Ensure the temperature setting is correct. Clean the condenser coils and check that the airflow is not blocked. If issues persist, contact customer support.
The Hoover HSBSF 178XK is equipped with a No Frost system, so manual defrosting is not required. However, if you notice frost build-up, check the door seals and ensure they close tightly.
To clean the interior, unplug the appliance and remove all food items. Use a mild detergent mixed with warm water and a soft cloth to wipe all surfaces. Avoid abrasive cleaners to prevent damage.
Unplug the refrigerator before changing the bulb. Locate the bulb cover inside the compartment, remove it, and replace the bulb with one of the same type and wattage. Replace the cover and plug the appliance back in.
Ensure the appliance is level and not in contact with other objects. Check for loose items inside that may vibrate. If the noise persists, it could be a sign of a mechanical issue, and you should contact a technician.
Yes, it is normal for the sides to feel warm as the condenser coils are located there and help dissipate heat. Ensure there is proper ventilation around the appliance for efficient operation.
Locate the temperature control panel inside the fridge. Use the buttons to adjust the temperature for both the fridge and freezer compartments according to your preference.
Regular maintenance includes cleaning the condenser coils every six months, checking door seals for wear, and ensuring the appliance is level. Additionally, replace the water filter if applicable.
After a power outage, the appliance should resume normal operation automatically. If it doesn't, unplug the unit, wait a few minutes, and then plug it back in. Adjust the temperature settings if necessary.