Hoover HPS700 001 User Manual
![Hoover HPS700 001 manual cover](/images/KDPeTYrbYXPWQNwRuRIORXBt/thumbs/thumb175x175.webp)
To clean the filter, locate the filter access panel at the bottom front of the machine. Open the panel, unscrew the filter cap, and remove any debris. Clean the filter under running water and replace it securely before closing the panel.
If the machine is not spinning, check if the load is balanced and not too heavy. Ensure the drain hose is not kinked or blocked and the filter is clean. Also, verify that the spin cycle is selected correctly.
Check for blockages in the drain hose and filter. Ensure the drain hose is installed correctly and not higher than the recommended height. If the problem persists, consider inspecting the pump for any obstructions.
Use high-efficiency (HE) detergent for the best performance. HE detergents produce fewer suds and are designed for modern washing machines, including the Hoover HPS700 001.
Run an empty wash cycle with hot water and add either a washing machine cleaner or a mixture of white vinegar and baking soda to the drum to remove any residues and odors.
Refer to the user manual for the specific error code. Most issues can be resolved by checking connections, cleaning filters, or resetting the machine. If the error persists, contact Hoover customer support.
Ensure the machine is level and stable. Check that all transit bolts have been removed. Avoid overloading and ensure the load is evenly distributed.
Clean the filter and detergent drawer monthly. Inspect hoses for wear every six months. Perform a maintenance wash every three months to keep the drum and internals clean.
Turn off the machine and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on. This should reset the system.
Yes, the Hoover HPS700 001 has a delicate cycle designed for fragile fabrics. Use a mild detergent and select the appropriate cycle to ensure gentle washing.