Hoover HND315SILVER User Manual
![Hoover HND315SILVER manual cover](/images/BHTfsxEaFfikDPeLzizWuYzg/thumbs/thumb175x175.webp)
To reset the Hoover HND315SILVER, press and hold the start button for about 5 seconds until the indicator lights flash. This will reset the control board.
Check for clogs in the drain hose and ensure that the sink drain is clear. Additionally, inspect the filter for debris and clean it if necessary.
Remove the lower dish rack, twist the filter assembly counterclockwise, and lift it out. Rinse the filter under running water to remove debris and reinstall it by aligning it and twisting clockwise.
Ensure that the rinse aid dispenser is filled. Selecting a higher temperature setting and using the "Extra Dry" option can also improve drying performance.
Error code "E3" indicates a water heating issue. Check if the heating element is functioning and inspect the thermostat for any faults.
Clean the spray arms every 3-6 months. Remove them by unscrewing or unclipping, and use a brush or a toothpick to clear any blocked holes. Rinse under water before reinstalling.
Place large items like pots and pans on the bottom rack, and smaller items like glasses and cups on the top rack. Ensure that items do not block the spray arms.
Ensure that the dishwasher is not overloaded and that the spray arms can move freely. Use a high-quality detergent and the appropriate wash cycle for the load.
Routinely clean the filter, check and clean the spray arms, ensure the door seals are free of debris, and run a cleaning cycle with dishwasher cleaner monthly.
Ensure that no dishes are obstructing the spray arms. Check for debris in the pump area and inspect the motor and bearings for wear.