Hoover HND 615 80 User Manual

To start a wash cycle, load your dishes, add detergent, close the door, select the desired program using the control panel, and press the start button.
First, check if the drain hose is kinked or blocked. Clean the filter and ensure the sink drain is not clogged. If the problem persists, inspect the pump or call a technician.
It is recommended to clean the filter every month to maintain optimal performance and prevent blockages.
Spots can be caused by hard water. Use a rinse aid to help prevent this issue, and ensure that you are using the correct amount of detergent.
Unusual noises may be caused by items inside the dishwasher that are improperly loaded or touching. Ensure that spray arms can rotate freely and check for foreign objects in the pump area.
Ensure that the rinse aid dispenser is filled and select a program with a drying phase. You can also open the door slightly after the cycle ends to allow moisture to escape.
Check if the dishwasher is properly plugged in and the circuit breaker is not tripped. If the issue persists, reset the dishwasher by turning it off and on again.
No, you should not use regular dish soap as it can cause excessive suds and potentially damage the machine. Always use detergents designed specifically for dishwashers.
Refer to the user manual to access the settings menu on the control panel. Adjust the water hardness setting according to your local water supply's hardness level.
Regular maintenance includes cleaning the filter, checking the spray arms for blockages, wiping the door gasket, and ensuring the rinse aid dispenser is filled.