Hoover HMDDS 5142WHK User Manual

To set the temperature, use the control panel located inside the fridge. Press the temperature button until you reach the desired setting. The recommended refrigerator temperature is between 3°C and 5°C.
Check if the vents inside the fridge are blocked by food items. Ensure that the door seals are clean and intact. If the problem persists, try resetting the temperature settings and consult the user manual for further troubleshooting.
To defrost the freezer, remove all items and unplug the refrigerator. Leave the door open and allow the ice to melt naturally. Use a towel to absorb water. Once defrosted, clean the compartment and plug the refrigerator back in.
Regularly clean the condenser coils at the back of the fridge, check door seals for damage, and ensure the fridge is level. Also, periodically clean the interior with a mild detergent.
This could be due to a blocked defrost drain. Locate the drain hole inside the fridge and clear any blockage using a pipe cleaner or warm water.
First, unplug the refrigerator. Locate the light cover inside the fridge, remove it by unscrewing or unfastening it, then replace the bulb with a new one of the same type and wattage. Replace the cover and plug the fridge back in.
Error code E1 typically indicates a temperature sensor fault. Check the sensor connections and ensure the sensor is properly seated. If the issue persists, contact Hoover customer support for assistance.
Yes, the door hinge can be reversed. Refer to the user manual for detailed instructions in reversing the door hinge, or contact a professional technician if unsure.
To activate holiday mode, press the holiday button on the control panel. This mode maintains a low energy consumption setting while keeping the freezer running normally.
Ensure the fridge is level and not in contact with walls or cabinets. Check for loose items inside the fridge. If noises continue, inspect the fan and compressor for any obstructions or damage.