Hoover HMCL 5172 BIN User Manual

To change the temperature setting, use the control panel located inside the refrigerator. Press the temperature button until you reach the desired setting. Refer to the manual for specific temperature ranges suitable for different types of food.
Check if the refrigerator is plugged in and the power is on. Ensure that the doors are closing properly and the seals are intact. Clean the condenser coils and make sure that the temperature setting is correct. If the problem persists, contact customer support.
The HMCL 5172 BIN is equipped with a frost-free system, so manual defrosting is not necessary. However, if you notice excessive frost build-up, it may be a sign of a malfunction and you should consult the manual or contact a technician.
First, unplug the appliance. Remove all food items and detachable shelves. Use a mixture of mild detergent and warm water to clean the interior surfaces. Avoid using abrasive cleaners or tools. Rinse with clean water and dry thoroughly before replacing shelves and food.
Ensure the refrigerator is placed away from heat sources and direct sunlight. Keep the doors closed as much as possible and ensure the seals are airtight. Maintain the recommended temperature settings and avoid overloading the appliance.
Check if the appliance is level and adjust the feet if necessary. Inspect the water inlet and ensure it is securely connected. Verify that the defrost drain is not clogged. If the issue persists, contact a service technician.
Yes, the door is reversible. Refer to the user manual for detailed instructions on how to invert the door swing direction. Ensure you have the necessary tools before starting the process.
Some noise is normal, but if you hear unusual sounds, check if the appliance is level and stable. Ensure that nothing inside is vibrating or rattling. If the noise continues, it may require technical inspection.
Unplug the refrigerator before replacing the bulb. Access the bulb cover inside the refrigerator, remove it, and replace the bulb with one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
Check if the door is properly closed and not left open for too long. Ensure that the refrigerator is not overloaded, which could block the door from closing fully. Review the alarm settings in the user manual and reset if needed.