Hoover HLX V85TGX-AUS User Manual
![Hoover HLX V85TGX-AUS manual cover](/images/KuJAzXPXUrKkWEmlYJLRXNpr/thumbs/thumb175x175.webp)
To reset the Hoover HLX V85TGX-AUS, turn off the machine, unplug it from the power source, and wait for about 2 minutes. Plug it back in and turn the machine on. This should reset the system.
Check if the drain hose is kinked or blocked. Ensure the filter is clean and that there are no obstructions in the pump. If the problem persists, consult the user manual or contact customer support.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water to remove any detergent residue. Ensure it's completely dry before reinserting it.
Excessive vibration can be caused by an unbalanced load. Ensure the machine is on a flat surface and rearrange the load evenly within the drum.
Regularly clean the filter, check and clean the detergent drawer, and inspect the door seal for any debris or damage. Run a maintenance wash with a cleaning solution monthly.
The Hoover HLX V85TGX-AUS can handle a maximum load of 8.5 kg. It's important not to overload the machine to ensure efficient washing and prolong its lifespan.
Ensure the lid is closed properly. Check if the load is balanced and not too heavy. If the issue persists, examine the drive belt for wear or damage.
Yes, the Hoover HLX V85TGX-AUS has a delicate cycle designed for fragile fabrics. Use a suitable detergent and place delicate items in a mesh laundry bag.
Inspect the door seal for any damage or debris. Ensure the hoses are properly connected and not cracked. Check the detergent drawer for blockages.
Run an empty cycle with hot water and a cup of white vinegar or a washing machine cleaner. Leave the door open after each wash to allow the drum to air out.